Kicker 12″ 4 Ohm 800W Peak CompVR Pro Car Audio Subwoofer Black 43CVR124

• The CompVR 12-Inch Subwoofer is a 4 dual voice coil design, making it easy to get the most out of your amp.
• With Santoprene surround that gives the cone added strength under stress, the Spiralead perimeter venting, and spring-loaded push terminals the Kicker 12″ CompVR Subwoofer provides high-quality and high-performance.
• CompVR creates your bass using high-temp, dual voice coils.
• The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.
• MEASUREMENTS – Overall Diameter: 12 | Mounting Depth: 6.25″ | Mounting Diameter: 11

Kicker 12″ 4 Ohm 800W Peak CompVR Pro Car Audio Subwoofer Black 43CVR124

The Kicker CompVR Subwoofer gives you incredible bang for the buck. Emphasis on bang! The CompVR 12-Inch Subwoofer is a 4 dual voice coil design, built for easy wiring. CompVR creates your bass using high-temp, dual voice coils. A ribbed Santoprene surround also gives the cone added strength under stress. The perimeter venting, Spiralead tinsel-lead technology, and spring-loaded push terminals are part of the high-performance engineering standards found on every KICKER woofer. The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.

This Listing Includes:

– (1) Kicker 12″ 4 Ohm 800W Peak CompVR Pro Car Audio Subwoofer Black 43CVR124

Thiele/Small Parameters:

– Re | 7.13 – Ohm electrical voice coil resistance at DC
– Krm | 0.01065 – Ohm WRIGHT inductance mode
– Erm | 0.87 – WRIGHT inductance mode
– Kxm | 0.05685 – Ohm WRIGHT inductance mode
– Exm | 0.75 – WRIGHT inductance mode
– Cmes | 474.11 – F electrical capacitance representing moving mass
– Lces | 49.66 – mH electrical inductance representing driver compliance
– Res | 108.625 Ohm resistance due to mechanical losses
– fs | 32.85 – Hz driver resonance frequency
– Mms | 163.3285g mechanical mass of driver diaphragm assembly including air load and voice coil
– Mmd (Sd) | 149.504g mechanical mass of voice coil and diaphragm without air load
– Rms | 3.174 kg/s mechanical resistance of total-driver losses
– Cms | 0.1445 mm/N mechanical compliance of driver suspension
– Kms | 6.95 N/mm mechanical stiffness of driver suspension
– Bl | 18.5685 Tm force factor (Bl product)
– Lambda | 0.0185 suspension creep factor
– Qtp | 0.7465 total Q-factor considering all losses
– Qms | 10.61 mechanical Q-factor of driver in free air considering Rms only
– Qes | 0.6965 electrical Q-factor of driver in free air considering Re only
– Qts | 0.6535 total Q-factor considering Re and Rms only
– Vas | 57.52965 I equivalent air volume of suspension
– n0 | 0.28%reference efficiency (2 pi-radiation using Re)
– Lm | 86.675 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
– Lnom | 87.17 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
– rmse Z | 2.7%root-mean-square fitting error of driver impedance Z(f)
– rmse Hx | 1.885%root-mean-square fitting error of transfer function Hx (f)
– Sd | 530.93cmdiaphragm area
– Xmax | 14 mmXmax (Linear Excursion)

Specifications:

– SIZE: 12″
– IMPEDANCE [Ohms]: 4 DVC
– Recommended Amplifier Power (watts RMS): 400
– Peak Power (watts, per ANSI/CTA-2031-A): 800
– SENSITIVITY [dB 1w/1m]: 86.9
– MOUNTING DEPTH: 6.25″
– MOUNTING DIAMETER: 11″
– MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3
– MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
– MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
– MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7

Product Dimensions:

-Length: 12.5″
-Width: 12.5″
-Height:7.5″

Product Weight:

-13.5 lbs

Package Dimensions:

-Length: 14″
-Width: 14″
-Height: 8″

Package Weight:

-15 lbs